azmie computer's

Blog ini mengandungi trick2 dan software yang boleh didapati dengan percuma. Sebagai tanda terima kasih anda, silalah klik pada iklan yang dipaparkan...

Custom Search
11:33 PM

Enable Direct Memory Access (DMA)

Posted by Mr. azmie

1. Right-click on My Computer, select Properties

2. Select the Hardware tab

3. Click the Device Manager button

4. Double-click IDE/ATAPI controllers

5. Double-click on the Primary IDE Channel

6. Click on the Advanced Settings tab (as shown in figure) The tab may or may not be available for each option. It is only available in Primary and Secondary Channels.

7. Set the Transfer Mode to "DMA if Available" both for Device
1 and 0

8. Click OK

9. Perform the same operation for other items in the list, if applicable.


pakeri said...

DMA ni untuk ape ek?